Aerpro AKTO23 9/10 INCH INSTALL KIT TO SUIT TOYOTA PRADO 2020-2024

The Aerpro AKTO23 9/10 Inch Installation Kit comes with all of the components required to install a 9/10 Inch trapezoid shaped radio into your Toyota Prado (2020-2024) vehicles with factory amplifier (exlcudes JBL variant) whilst maintaining important vehicle features such as Steering Wheel Control functionality.

Head unit ISO harness is not included in the kit. Recommended to be installed with an Aerpro APP8 Head Unit Secondary ISO Harness (sold separately).

Compatible with the following 9/10 Inch Trapezoid Head Units:

• ALPINE:INE-AW409S, INE-AX809
• KENWOOD:DMX80AXS
• PIONEER:DMH-AP6650BT
• AERPRO:AM9X, AM10X
• VARIOUS ANDROID HEAD UNITS

Important Information:

• This kit is developed to suit universal trapezoid shaped radios. It will not suit standard DIN or double DIN sized radios
• This kit does not support Pioneer CAN Bus features but comes with a steering wheel control adapter. Instead of selecting 'CAN Bus Adapter' on boot-up, go to the Menu and select 'Steering Wheel Control' > 'With Adapter'.
• Does not suit JBL Amplified variant.
• Feature Retention will be radio dependent.

• To suit Toyota Prado (2020-2024) vehicles with steering wheel controls
• Compatible with Alpine INE-AW409S, Kenwood DMX80AXS, Pioneer DMH-AP6650BT, Aerpro AM9X, and various Android head units
• Includes all the parts required to complete the installation and to retain important vehicle features
• Retains steering wheel controls (Including phone button) and factory reverse camera retention (if equipped)
• To simplify installation, this kit is compatible with Aerpro APP8 aftermarket headunit harness adapters

• Kit Inclusions:
  • Black w/Silver Facia Kit
  • Steering Wheel Control Interface Harness
  • SWC Patch Lead
  • Adaptor to allow for 9 Inch and 10 Inch radios to be installed
  • Antenna Adaptor
  • Factory USB Retention Adaptor
  • Camera Retention Adaptor
• Vehicle Feature Retention:
  • Steering Wheel Controls: Yes
  • Factory Reverse Camera: Yes (if equipped)
  • AUX Input: Yes
  • USB Input: Yes
  • Parking Tones: Yes
  • Factory Amplifier: Yes
  • Vehicle Menu: No
  • Other: Does not suit JBL Amplified variant
• Important Information:
  • This kit is developed to suit universal trapezoid shaped radios. It will not suit standard DIN or double DIN sized radios
  • This kit does not support Pioneer CAN Bus features but comes with a steering wheel control adapter. Instead of selecting 'CAN Bus Adapter' on boot-up, go to the Menu and select 'Steering Wheel Control' > 'With Adapter'.
  • Feature Retention will be radio dependent.