Redarc Universal Tow-Pro Extended Wiring Kit TPWKIT-014-KITS

The REDARC Universal Tow-Pro Extended Wiring Kit supports the installation of the Tow-Pro Elite electric trailer brake controller into a wide range of vehicles.

It provides all the parts and wiring flexibility to fit most vehicles.

It is suitable for vehicles where the start battery is on the other side of the vehicle from the rest of the installation via 3.7m power cable length.

The only difference between this kit and Universal Tow-Pro Wiring Kit is the length of the positive power connection.

The Universal Tow-Pro Extended Wiring Kit range replaces Tow-Pro Wiring Kit range and consolidates the range from 10 kits down to 3.The Universal Tow-Pro Extended Wiring Kit comes with the complete range of hardware required to install a Tow-Pro Elite brake controller and contains a Wago Boot, the Encapsulated Protection Device, Wiring Harness, Mounting Bracket and fitting instructions.

The standard 1m Remote Head cable that comes supplied in the Tow-Pro Elite (EBRH-ACCV3) will support the location of the remote head in the centre of the vehicle when the main unit is located around the glovebox area.

If the preferred location for the remote head in these instances is on the drivers side, you will need to purchase and fit the 2m remote head cable.

Modern vehicles continually feature new technology, the last couple of years have seen a rise in modern driving aids such as Autonomous Emergency Braking, Adaptive Cruise Control, lane departure and collision avoidance.

REDARCs range of Universal Wiring Kits is compatible with this new technology.

When you use a REDARC Universal Tow-Pro Extended Wiring Kit you ensure a high-quality and fast installation of the award-winning Tow-Pro Elite electric trailer brake controller.

REDARC also offer a complete range of accessories to assist the installation of the Tow-Pro Elite into just about any vehicle such as Switch Inserts, Encapsulated Protection Devices, Remote Head Wiring Kits and a Mounting Bracket Kit.

WHAT'S INSIDE?

Tow-Pro Extended Universal Wiring Kit (TPWKIT-014)Select one of the 10 vehicle specific switch inserts to allow the remote head to be installed into an existing vehicle dashboard switch panelSWITCH INSERT COMPATIBILITYPART NUMBERSUITABLE FORTPSI-001Universal modelTPSI-002Suitable for Toyota Hilux & Mitsubishi TritonTPSI-003Suitable for Holden ColoradoTPSI-005Suitable for Isuzu D-MAX SX & Mazda BT50 (2020 onwards)TPSI-006Suitable for Isuzu D-MAX LS & Isuzu MU-X (pre 2020)TPSI-007Suitable for Toyota 70 SeriesTPSI-008Suitable for Nissan Pathfinder R52 (2013 onwards) & Mercedes-Benz X-Class (2018 onwards)TPS-009Suitable for Mazda BT50 (2011 - 2020)TPSI-010Universal Remote Head KitTPSI-011Suitable for Toyota 2019+ Square Inserts (including 200 & 300 Series) * Not compatible with Ford Ranger and Everest, please refer to TPWKIT-012.