Aerpro GETZPLUG Steering Wheel Control Plug fits Hyundai Getz

The Aerpro GETZPLUG is designed to suit the Hyundai Getz 2002-2011 that were optioned with Steering Wheel Controls. The GETZPLUG connects to the factory 3 pin connector where the steering control wires were populated and provides 2 loose wires as an output, to save cutting factory wires.

These loose wires can be utilised by connecting to a compatible radio with Steering Control "Learning" function, or connecting to a compatible Steering Control Interface such as the APUNISW2 or AXSWC.

• Provides an aftermarket connector and wires to avoid cutting factory wires

Specs: 

• Length: 280mm
• Black/White Trace: Key 1 (Analogue Signal)

• Pink: Key Ground (Analogue Ground)

• APUNISW2 Configuration:

  • APUNISW2 Grey to GETZPLUG Black/White Trace.
  • APUNISW2 Black (Analogue Ground) to GETZPLUG Pink.
  • (Dip 5 + 7 ON, The rest OFF)

• AXSWC Wiring:

  • AXSWC Green/Orange to GETZPLUG Black/White Trace.
  • GETZPLUG Pink to Vehicle Chassis (Ground)
  • (Auto Detect, Push and hold VOL+)