Aerpro APUSBMT4 USB-c passthrough and USB charge socket to suit Mitsubishi 19.5mm x 36.5mm

Aerpro APUSBMT4 USB-C Passthrough and USB Charge has been designed specifically to suit various Mitsubishi vehicles. It replaces the spare factory switch blanking plates in the vehicle dashboard that measure 19.5mm wide x 36.5mm high (face measurement) / 21mm wide x 38mm high (base measurement), providing seamless USB integration for your vehicle. Featuring two USB ports, USB-C passthrough is designed for smartphone and device fast charging at 3A max and the other provides sync for Audio, CarPlay & Android Auto when connected to the rear USB input on compatible aftermarket headunits. The second USB port is used for charging only allowing for multiple phones to be charged on the go! The charge port illuminates blue making it easy to find day and night. The clip-in design combined with the simple 3 wire plus USB connection, makes it quick and easy to install, providing a professional and discreet USB upgrade solution for the vehicle.

Important Information:

• The USB-C Passthrough port is a female connector on the back of the APUSBMT4. This plug does not include a USB-C Flylead which may be required to complete your installation (sold separately).

Features: 

• Suitable for Mitsubishi vehicles with 19.5mm wide x 36.5mm high (face) / 21mm wide x 38mm high (base) switch blanking plates
• Replaces factory switch blanking plates in the dashboard
• Vehicle specific OEM style design for discreet seamless USB integration
• Dual USB ports, type C and type A to provide fast charge and one sync pass through
• Charge port supports up to 3 amps max and illuminates blue
• Audio/sync port provides USB-C pass through for Audio, CarPlay & Android Auto when connected to compatible headunits
• Ferrite choke on USB cable to reduce signal interference
• Simple clip-in design makes it easy to install with no modifications required
• 3 wire installation; accessory power, illumination, earth/ground, plus USB connection

Specs: 

• Vehicle Application: Various Mitubishi Vehicles
• Panel Dimensions:
  • Base: 21mm (W) X 38mm (H)
  • Face: 19.5mm (W) X 36.4mm (H)
• Connection Type: USB-A + USB-C
  • USB-A: Fast Charge 3.0A max
  • USB-C: Pass Through (Audio and Sync)
• Mounting Type: Clip-In
• Wiring Installation:
  • 12V+ Accessory Power: Red
  • Earth: Black
  • Illumination: Blue
  • USB1 Connection: USB-A
  • USB2 Connection: USB-C
• NOTES:
  • The USB-C Passthrough port is a female connector on the back of the APUSBMT4. This plug does not include a USB-C Flylead which may be required to complete your installation (sold separately).

Vehicles known to work with this product:

• Mitsubishi ASX 2010-2012 XA (Headunit Dependant)
• Mitsubishi ASX 2012-2014 XB (Headunit Dependant)
• Mitsubishi Challenger 2009 - 2013 PB
• Mitsubishi Challenger 2013-2015 PC
• Mitsubishi Lancer 2007-2013 CJ (Headunit Dependant)
• Mitsubishi Outlander 2003-2006 ZE, ZF
• Mitsubishi Outlander 2007-2012 ZG, ZH (Headunit Dependant)
• Mitsubishi Pajero 2000-2006 NM, NP
• Mitsubishi Pajero 2006-2014 NS, NT, NW (Headunit Dependant)
• Mitsubishi Pajero 2012-2019 NW, NX (Headunit Dependant)
• Mitsubishi Triton 2007-2009 ML [GL, GLX]
• Mitsubishi Triton 2007-2009 ML [GLS, GLX-R, VR]
• Mitsubishi Triton 2009 - 2014 MN [GL-R, GLX]
• Mitsubishi Triton 2009 - 2014 MN [GL]
• Mitsubishi Triton 2009-2012 MN [GLX-R]
• Mitsubishi Triton 2012-2014 MN [GLX-R]
• Mitsubishi Triton 2015 MN [GL, GLX, GLX-R]