Aerpro AIMBT Bluetooth Vehicle Immobiliser Black Wired with Key-Tag & Smartphone Security

The Aerpro AIMBT Bluetooth Vehicle Immobiliser is a hardwired, black-wired anti-theft immobiliser that arms and disarms automatically via a paired BT key-tag or smartphone, so there is nothing to insert, press or remember on the way in or out of the vehicle. Day-to-day security is handled entirely by proximity: the immobiliser arms the moment the key-tag or phone moves out of range, and disarms itself again the moment it comes back within range.

Installation is via a single immobilisation point, most commonly the ignition circuit. The included relay is rated to a nominal 10A and a maximum 20A load, giving flexibility to use alternative connection points if preferred such as the fuel pump or push-to-start (PTS) wire. All vehicle-side wiring is finished in black rather than colour-coded, making it difficult to identify which wire performs which function, and connects directly into the module with no plugs to unclip, so the immobiliser cannot simply be disconnected to bypass it.

Proximity detection is adjustable across 5 levels from approximately 3 to 15 metres, tuned to suit the vehicle and how it is typically parked. If the key-tag is lost or its battery goes flat, and the paired smartphone is not in range, a valet and emergency override procedure allows the vehicle to be started manually without needing a paired key-tag or phone on hand. Power-off memory retains the armed or disarmed status even if the vehicle battery is disconnected, so a flat battery or battery swap will not reset the system's security state.

For vehicle owners after reliable theft protection that works automatically in the background, the Aerpro AIMBT Bluetooth Vehicle Immobiliser is a dependable addition to any 12V DC vehicle including cars, utes, 4WDs, vans and most light commercial vehicles.

WARNING - KEEP OUT OF REACH OF CHILDREN
The key-tag contains a lithium coin battery, which is hazardous whether new or used. Can cause severe or fatal injury within 2 hours if swallowed or placed in any part of the body. Seek medical attention immediately. Keep batteries out of reach of children.

IMPORTANT:
Remove the plastic tab from the battery inside the key-tag before first use to activate it.

Specification    
Connectivity
Working Frequency: 2.4GHz Bluetooth Low Energy (BLE)
Key-Tag Coding: Dialog
Proximity Range: 5 adjustable levels, approximately 3 to 15 metres
Power
Main Unit Working Voltage: 12V DC ±3V
Main Unit Working Current: <21mA
Main Unit Standby Current: 10mA
Key-Tag Battery: CR2032
Key-Tag Standby Current: <2µA
Installation
Immobiliser Type: Single-point immobiliser
Recommended Immobilisation Point: Ignition circuit (fuel pump or push-to-start (PTS) wire as an alternative)
Relay Rating: Nominal 10A, maximum 20A
Wiring: Black, non-colour-coded, hardwired directly into the module with no plug connector
Vehicle Compatibility
Application: 12V DC, suits cars, utes, 4WDs, vans and most light commercial vehicles
Inclusions
1 x AIMBT Immobiliser Main Unit (with integrated wiring loom that includes valet switch and buzzer)
1 x BT Key-Tag (CR2032 battery pre-installed)
1 x Key-Tag Hook
Adhesive Mounting Tape (for immobiliser module)

Features    
Automatic Bluetooth Arming: Arms and disarms itself as the key-tag or paired smartphone moves out of or back into range, with no button press needed for everyday use.
Dual Key Options: Works with the included BT key-tag or a paired smartphone as a backup, so there is always a way to arm and disarm the system.
Instant Anti-Theft Lockout: Immobilises the moment the ignition is switched off and the key-tag or phone signal is lost, stopping unauthorised starts.
5-Level Adjustable Range: Proximity detection is tunable from approximately 3 to 15 metres to suit the vehicle and how it is parked.
Valet/Emergency Override: Lets the vehicle be started manually if the key-tag is lost or its battery goes flat, without a replacement key-tag on hand.
Power-Off Memory: Retains its armed or disarmed status even after the vehicle battery is disconnected, so security is not reset by a flat battery.
Low-Battery Alert: Audible warning on the main unit, plus up to 1-year key-tag battery life from a single replaceable CR2032 (battery included).
12V DC Compatible: Suits cars, utes, 4WDs, vans and most light commercial vehicles.
Tamper-Resistant Wiring: Finished in black rather than colour-coded so it can't be identified at a glance, and connects directly into the module with no plugs to unclip or bypass.
20A-Rated Relay: Nominal 10A, maximum 20A load rating suits a wide range of vehicle circuits without needing an additional relay.
Single-Point Immobiliser Installation: Wires into the ignition circuit as the primary immobilisation point, or the fuel pump or push-to-start (PTS) wire as an alternative.
Hardwired Installation: Wired directly into the vehicle circuit for a permanent fitment rather than a plug-in module that can be easily found and removed.